Keep belongings close
Keep garage items at home and easy to reach.
Portable storage for garage projects
Clear Your Garage for Floor Coating—Without Filling Your House
Epoxy, polyaspartic, and other floor coatings need a clear garage. BlueBox gives your belongings a temporary place in the driveway, close to home.
Time delivery around your installer’s preparation and return-to-use instructions.
Start with a clear work area
Your coating crew needs the whole floor—not a path through the clutter.
Floor preparation and coating need access to the full slab. Clear tools, boxes, and shelving before the crew arrives.
Ask what must come off the floor, shelves, and lower walls.
Leave room for preparation equipment and crew access.
Know where items will stay until the floor is approved for use.
A simple project timeline
Clear the garage once, then put it back when the floor is ready.
Use your installer’s preparation, installation, and return-to-use schedule.
- Step 1
Confirm your installer’s requirements
Ask what must be moved, where the crew needs access, and when items can return.
- Step 2
Schedule container delivery
Allow enough time to load before floor preparation begins.
- Step 3
Load your garage belongings
Load tools, shelves, and boxes once. Keep essentials near the door.
- Step 4
Complete the floor-coating project
Keep belongings out of the crew’s way during preparation and coating.
- Step 5
Unload after installer approval
Put items back only after your installer approves the floor for their weight.
Why use BlueBox
Make room for the project without moving garage clutter into your life.
Use the container as nearby storage while the floor is being coated.
Keep clutter out of the house
Keep tools, shelves, and totes out of spare rooms and hallways.
Skip repeated storage-unit trips
Load in the driveway once, then unload when your installer approves the floor.
Before delivery
Use this driveway and loading checklist.
A few quick checks help the container and coating crew share the property.
Measure the driveway
Check length, width, slope, and overhead clearance.
Leave room for the coating crew
Keep the garage opening and equipment path clear.
Check local and HOA rules
Confirm neighborhood, street-placement, and permit rules.
Keep essentials easy to reach
Load essentials last and label boxes.
Set restricted items aside
Keep flammables, propane tanks, and other restricted items out. Ask us if you are unsure.
Choose the right container size
Count shelves, tools, cabinets, bikes, and bulky gear—not just boxes.
Garage project questions
What to know before the coating crew arrives.
Your installer’s instructions always take priority. These answers cover the storage side.
Does the whole garage need to be empty for floor coating?
Ask your installer. Most projects need clear access to the slab, edges, joints, and repair areas.
How long should I keep the portable storage container?
Keep it through preparation, installation, and the return-to-use period your installer gives you. Timing varies by system and conditions.
Can the container stay in my driveway during the project?
Often, yes, if it leaves the garage door, crew path, and equipment area clear. Review placement with your installer and delivery team.
What size container works for garage belongings?
It depends on what you store. Shelving, cabinets, bikes, lawn equipment, and bulky tools need more room than boxes. We can help you compare sizes.
Does BlueBox install garage floor coatings?
No. BlueBox provides portable storage. Your flooring contractor prepares and coats the floor and approves when it can be used again.
Plan storage before floor-coating day
Give the installer a clear garage and keep your belongings close.
Share your project dates and driveway details. We will help choose a container and delivery date.